top of page
Untitled-1_edited_edited.png

Arc Flash Studies & Electrical Compliance
in Arizona

Serving Phoenix, Tuscon, Mesa, and more.

15

Arc Flash Studies in AZ

9

IR Surveys in AZ

370+

Training Sessions Nationwide

Take the first step toward a safer, more compliant workplace. Request more information below!

Arc Flash Study in Arizona

Arizona has no statewide electrical code, so the labeling rules your equipment must meet depend on the city or county you operate in, where editions range from the 2017 to the 2023 NEC. Herzig Engineering studies your power system, calculates the incident energy at each point, and labels every piece to the edition your jurisdiction enforces. The semiconductor plants and data centers expanding across the Phoenix metro run enormous new services that carry high fault current. That is where your study has to be precise.

 

  • Free NFPA 70E training included with every study

  • Fault current and coordination review on large plant services

  • Full incident energy analysis to NFPA 70E and IEEE 1584-2018

  • Labeling matched to the NEC edition your local jurisdiction enforces​

 

Even brand new switchgear needs the numbers before anyone works it live.

​

​

Arc-Flash.png
Infrared-Thermography.png

Infrared Inspections in Arizona

Infared scanning finds a failing connection by its head, and in Arizona, the equipment is already fighting the heat. Desert summers push ambient temperatures past 110 degrees, which cuts conductor capacity and ages insulation faster right when cooling loads peak. A loose connection that would ride along in a milder climate can fail here. A thermal survey catches it on live equipment, before the heat does.

 

  • Solar array and inverter scans for Arizona's many PV sites

  • Report with temperatures, images, and ranked repair priorities

  • No shutdown required; the survey runs on energized equipment

  • Thermographic scans of panels switchgear, transformers, and terminations

 

From plant switchgear to solar inverters, a scan before summer beats a failure during it.

Lockout Tagout Programs in
Arizona

A lockout tagout program keeps stored energy from reaching a worker during service or maintenance. Arizona produces most of the nation's copper, and its mines and smelters run crushers, conveyors, and furnaces carrying enormous mechanical and electrical energy. ADOSHA, the state's own OSHA program, enforces the federal lockout standard, 1910.147, with its own inspectors.

​

  • Built to OSHA 1910.147 and NFPA 70E

  • Energy control audits and employee training included

  • Covers electrical, mechanical, hydraulic, and pneumatic energy

  • Written, machine-specific lockout procedures for each piece of equipment

 

At a smelter or a crusher, the lock is what makes the equipment safe to touch.

Lockout-tagout.png
Electrical Safety Training & Audits (4).png

Electrical Safety Training & Audits in Arizona

Arizona's aerospace and defense plants, from missile production in Tuscon to helicopter lines in Mesa, keep large skilled workforces around energized equipment. Because Arizona runs its own OSHA program, those employers answer to ADOSH inspectors, not federal OSHA. We train your workers to recognize and avoid electrical hazards to the NFPA 70E standard ADOSH enforces.

​

  • Certificates issued and documented for your records

  • NFPA 70E training for qualified and unqualified workers

  • Covers ADOSH and OSHA 1910.332 training requirements

  • On-site or virtual sessions built around your equipment and tasks

 

Trained workers are what an ADOSH inspector expects to find.

Reques Safey Quote

Don't wait! Take the first step toward safety.

Request a Same-Day Safety Quote

Have you identified your facility's current electrical hazards? Are your workers protected as Arizona law requires? How big is your risk of electrical disaster today?

Frequently Asked Questions

bottom of page